Products

Industrial Cleaners for
Effective and Reliable Cleaning Processes

Our industrial cleaners are formulated to effectively remove oil, grease, residues, and contaminants from metal parts, equipment, and industrial surfaces.

MASTER STAGES® Series

Suitable for immersion, spray, and circulation cleaning systems.

Parts Washing Fluid with Corrosion Inhibitor
Master STAGES™ CLEAN 2029 “One Step” is a highly concentrated cleaner/corrosion inhibitor designed for spray washers and immersion tanks. This product will remove heavy soils and provide two-to-four weeks of indoor corrosion inhibition on steel and cast iron parts.

  • Formulated without silicates or other high pH additives, CLEAN 2029 “One Step” is compatible with ultrafiltration systems and bioremediation
  • An excellent choice for cabinet-style spray washers and can be used for washing steel, stainless, cast iron, titanium, and many aluminum alloys
  • Hard water tolerant, it provides long bath life
  • Environmental approvals are simplified because CLEAN 2029 “One Step” contains no nitrites, barium, phenols, or butyl cellosolve
  • This formula has very low V.O.C. content and no SARA 313 reportable ingredients
  • Low foaming for use in high-pressure spray washers with temperatures above 140°F (60°C)
Download Datasheet

All-purpose Cleaner
Master STAGES™ Task2™ All Purpose Cleaner is an industrial strength, water based cleaning agent that does an outstanding job in the industrial environment for cleaning a variety of shop soils from all common surfaces. Task2 out-cleans all the green, crystal,
purple, and blue butyl-based products you may have
tried in the past.

  • Use full strength or dilute
  • Versatile all-around shop cleaner
  • Pratt Whitney Aerospace
  • Approval PMC 1455-11
  • Contains no butyl, caustic, silicate, phosphate, nitrite, phenol, or borate
  • Very low V.O.C. content, and conductivity
  • Environmentally friendly, certified “Readily Biodegradable” by OECD
  • Method 301D (EPA Guideline OPPTS 835.3110)
  • Will not harm TRIM metalworking fluids
Download Datasheet

Grime Fighter, Super Strength Industrial Cle
Master STAGES™ Task2™ is a grime fighting, industrial strength, non-butyl, water based cleaning agent that does an outstanding job in the industrial, commercial, or office environment. Task2 out cleans all the green, crystal, purple, “mean”, “complex”, and “simple” butylbased products you may have tried in the past.

  • Use full strength or dilute up to 100:1
  • For the toughest industrial cleaning applications
  • Pratt Whitney Aerospace Approval PMC 1247-1
  • Contains no butyl, caustic, silicate, phosphate, nitrite, phenol, or borate
  • Very low V.O.C. content, and conductivity
  • Environmentally friendly, certified “Readily Biodegradable” by OECD Method 301D (EPA Guideline OPPTS 835.3110)
  • Will not harm TRIM metalworking fluids
Download Datasheet
WHAMEX® Series

Effective for general industrial cleaning and maintenance applications.

Machine Tool Sump and System Cleaner
Master STAGES™ Whamex™ is a safe, fast-acting concentrated formula that will save machine cleaning downtime while removing the oily residues, scums, and insoluble soap deposits that reduce coolant life. Whamex is made for cleaning out machine tool sumps and larger systems, coolant supply lines, and coolant recycling equipment. Whamex is compatible with most waste treatment (including ultrafiltration) and will not degrade TRIM metalworking fluids when used as directed.

  • A very specialized formula that draws many years of hands-on experience in machine clean outs
  • Quickly breaks down and lifts off insoluble scum deposits hidden in lines and difficult to reach areas — getting rid of these residues is one of the best ways to extend coolant life in your system
  • Very hard water tolerant allowing it to be effective in raw water or used coolant
  • Environmental approvals are simplified because Whamex contains no nitrites, phosphates, barium, phenols, or butyl cellusolve; this formula has very low V.O.C. content and no SARA 313 reportable ingredients
  • When used as directed below, this product is compatible with TRIM brand semisynthetic and soluble oil coolants, as well as most competitive coolants. Will remove heavy soils from machines without affecting paints, coatings, seals, hoses, or skirting, and it won’t leave a slippery residue
  • Short-term corrosion inhibitors prevent flash rusting of machine surfaces and ways
Download Datasheet